Shop Geometric Jewellery, Made in Australia

Filters

Showing all 27 products

View 100/200/All

Please add widgets to the WooCommerce Filters widget area in Appearance > Widgets

27 products

For lovers of unconventional geometric jewellery

Welcome to the treasure chest. Here you’ll find a range of unconventional geometric jewellery and statement everyday pieces for rule breakers and story makers. They’re worlds away from the designs you’ll see in your local shopping mall window. And best of all, they’re crafted right here in Sydney, Australia. Take a look around and drop us a message if you have any questions!

  • Geometric 3D printed silver ring
    3D printed statement ring in sterling silver and oxidised sterling silver

    Negative/Positive oxidized 3D printed ring

    The award winning Negative/Positive ring is a statement piece not for the faint of heart. Sitting loud and proud 2cm above the finger, it's a ring that's sure to command the room no matter where you are. Created from the haphazard intersection of multiple planes, its design makes it almost impossible to mass produce using a mould. Each and every ring is created on a 3D printer, cast in silver and lovingly hand finished. This ring weighs in at a generous 18 grams of solid sterling silver. Winner of Community's Choice at the 2014 Etsy Design Awards. Need help finding your ring size? Check out the ring sizing guide. Dimensions Sphere: 20mm Ring band: 4mm wide, 2mm thick Finish Sphere: Oxidized inner surfaces, highly polished edges Ring band: Satin finished outer band, polished inner band Processing time Each Negative/Positive ring is printed to order and sized to fit you. Please allow 7 to 10 working days (excluding shipping) for it to be created. © Fairina Cheng
    $465.00
    Rated 5.00 out of 5
  • 3D printed silver pendant
    3D modelled oxidized sterling silver necklace

    Negative/Positive 3D print pendant

    This unisex geometric silver pendant looks fantastic on both men and women. Designed on a 3D modelling program, each pendant is cast in solid sterling silver and lovingly hand finished. At approximately 12 grams, it has a lovely weight to it. This listing is for the pendant only and does not include a chain. Dimensions Pendant: 20mm Finish - Silver (matte inner surfaces, highly polished edges) - Two-tone (oxidized inner surfaces, highly polished edges) Processing time Each Negative/Positive pendant is made to order. Please allow 3 to 5 working days (excluding shipping) for it to be created. © Fairina Cheng
    $205.00
    Rated 5.00 out of 5
  • 3D printed pendant in sterling silver
    3D modelled ball necklace

    Negative/Positive silver 3D print necklace

    This 3D modelled pendant was the first ever creation in our Negative/Positive collection. It was designed on a computer and brought to life through the use of 3D printing technologies. Featuring matte inner surfaces and highly polished edges, its form makes it almost impossible to create by hand alone. The pendant weighs in at a generous 12 grams of solid sterling silver and has a lovely weight to it. Dimensions Pendant: 20mm Chain: Select your chain length from the drop down menu below Processing time Each Negative/Positive pendant is made to order. Please allow 3 to 5 working days (excluding shipping) for it to be created. © Fairina Cheng
    $220.00$235.00
    Rated 5.00 out of 5
  • 3D modelled oxidized sterling silver necklace
    Oxidized 3D modelled necklace

    Negative/Positive oxidized 3D print necklace

    This 3D modelled necklace was designed on a computer as one of the first ever creations in the Negative/Positive collection. Different from every angle, it's a design you just can't stop looking at! It features oxidized inner surfaces offset by contrasting polished edges. The pendant weighs in at a generous 12 grams of solid sterling silver and has a lovely weight to it. Dimensions Pendant: 20mm Chain: Select your chain length from the drop down menu below Processing time Each Negative/Positive pendant is made to order. Please allow 3 to 5 working days (excluding shipping) for it to be created. © Fairina Cheng
    $220.00$235.00
    Rated 5.00 out of 5
  • Sterling silver 3D print necklace on stainless steel cable
    Silver 3D print necklace on stainless steel cable chain

    Negative/Positive silver pendant on stainless steel cable

    This geometric solid sterling silver pendant hangs on a durable stainless steel cable chain. Part of our signature Negative/Positive collection, its form makes it almost impossible to create by hand alone. Choose from a 38cm choker-style chain, a 45cm standard length chain or a long 70cm chain. The 70cm chain is long enough to slip comfortably over the head and keeps it elegant with a simple, curved silver tube in place of a clasp. The pendant alone weighs in at a generous 12 grams of solid silver and has a lovely weight to it. Dimensions Pendant: 20mm Cable: 1mm thick Processing time Each Negative/Positive pendant is made to order. Please allow 3 to 5 working days (excluding shipping) for it to be created. © Fairina Cheng
    $255.00
    Rated 5.00 out of 5
  • Oxidized 3D printed necklace on stainless steel cable
    Oxidised silver 3D printed pendant on a stainless steel cable chain

    Negative/Positive oxidised pendant on stainless steel cable

    This necklace features an oxidised sterling silver pendant hanging from a durable stainless steel cable chain. Created through a 3D printing process, its form makes it almost impossible to create by hand alone. Choose from a 38cm choker-style chain, a 45cm standard length chain or a long 70cm chain. The 70cm chain is long enough to slip comfortably over the head and keeps it elegant with a simple, curved silver tube in place of a clasp. The pendant alone weighs in at a generous 12 grams of solid silver and has a lovely weight to it. Dimensions Pendant: 20mm Cable: 1mm thick Finish Oxidised inner surfaces, highly polished edges Processing time Each Negative/Positive pendant is made to order. Please allow 3 to 5 working days (excluding shipping) for it to be created. © Fairina Cheng
    $255.00
    Rated 5.00 out of 5
  • Geometric silver ball ring created through a 3D printing process
    Geometric 3D printed stacking rings in sterling silver

    Negative/Positive mini silver 3D print ring

    Despite its size, this is one little ring that's sure to stand out. This silver 3D print ring is created through a computer aided design process and cast in solid sterling silver. Featuring frosty white inner surfaces and striking polished edges, its form makes it almost impossible to create by hand alone. Choose your ring in one of two sizes – Mini (8mm sphere) and Midi (10mm sphere). If one just isn't enough, it's also available in a set of two! Need help finding your ring size? Check out the ring sizing guide. Dimensions Ring band: 2.6mm wide, 1.3mm thick Processing time Each Negative/Positive ring is made to order. Please allow 3 to 5 working days (excluding shipping) for it to be created. © Fairina Cheng
    $159.00$169.00
    Rated 5.00 out of 5
  • Oxidized ball ring
    3D printed rings

    Negative/Positive mini two-tone 3D print ring

    Pretty and petite, this geometric sterling silver ring features oxidized inner surfaces and highly polished edges. Designed through a 3D printing process, its form makes it almost impossible to create by hand alone. Perfect worn solo or stacked with other rings. Choose your ring in one of two sizes – Mini (8mm sphere) and Midi (10mm sphere). If one just isn't enough, it's also available in a set of two! Need help finding your ring size? Check out the ring sizing guide. Dimensions Ring band: 2.6mm wide, 1.3mm thick Processing time Each Negative/Positive ring is made to order. Please allow 3 to 5 working days (excluding shipping) for it to be created. © Fairina Cheng
    $159.00$169.00
    Rated 5.00 out of 5
  • Blackened silver ball ring
    Blackened geometric ball ring

    Negative/Positive mini oxidized 3D print ring

    Pretty and petite, this little beauty is perfect worn solo or as a stacking ring. Each geometric sphere is cast in solid sterling silver and assembled on a handmade ring band. The edges are polished, then oxidized, and take on a beautiful glossy sheen that ranges from a smoky black to a dark gunmetal grey. Choose your ring in one of two sizes – Mini (8mm sphere) and Midi (10mm sphere). If one just isn't enough, it's also available in a set of two! Need help finding your ring size? Check out the ring sizing guide. Dimensions Ring band: 2.6mm wide, 1.3mm thick Processing time Each Negative/Positive ring is made to order. Please allow 3 to 5 working days (excluding shipping) for it to be created. © Fairina Cheng
    $159.00$169.00
  • Rose gold 3D printed stacking ring
    Rose gold geometric ring, created through a 3D printing process

    Negative/Positive mini rose gold and silver 3D print ring

    This 3D modelled ring features a stunning combination: the warm blush of solid 9ct rose gold and the cool tones of highly polished sterling silver. Pretty and petite, it's perfect worn solo or stacked with other rings. Choose your ring in one of two sizes – Mini (8mm sphere) and Midi (10mm sphere). Need help finding your ring size? Check out the ring sizing guide. Dimensions Ring band: 2.6mm wide, 1.3mm thick Processing time Each Negative/Positive ring is made to order. Please allow 3 to 10 working days (excluding shipping) for it to be created. © Fairina Cheng
    $295.00$395.00
    Rated 5.00 out of 5
  • Yellow gold stacking ring
    Yellow gold geometric ring

    Negative/Positive mini gold and silver 3D print ring

    Who says you can't wear gold and silver together? Pretty and petite, this two-tone beauty is the best of both worlds, combining bright and sunny 9ct yellow gold and cool, collected sterling silver. Perfect worn solo or stacked with other rings. Choose your ring in one of two sizes – Mini (8mm sphere) and Midi (10mm sphere). Need help finding your ring size? Check out the ring sizing guide. Dimensions Ring band: 2.6mm wide, 1.3mm thick Processing time Each Negative/Positive ring is made to order. Please allow 3 to 10 working days (excluding shipping) for it to be created. © Fairina Cheng
    $295.00$395.00
  • Geometric 3D printed stacking rings in sterling silver
    3D printed rings

    Negative/Positive set of two sterling silver stacking rings

    Mix and match to create your own sterling silver stacking ring set! These deceptively simple rings are dainty with a modern twist. Choose your rings in one of two sizes – Mini (8mm sphere) and Midi (10mm sphere). Also available individually in silver, two-tone and oxidized. Need help finding your ring size? Check out the ring sizing guide. Dimensions Ring band: 2.6mm wide, 1.3mm thick Processing time Each Negative/Positive ring set is made to order. Please allow 3 to 5 working days (excluding shipping) for your rings to be created. © Fairina Cheng
    $285.00$305.00
    Rated 4.67 out of 5
  • 3D printed oxidized sterling silver adjustable ring
    3D printed sterling silver open ring

    Negative/Positive Duo 3D print open ring

    Duo combines the Mini ring and the Midi ring into one striking adornment. Putting a fresh twist on the Negative/Positive collection, the open band features a bold 10mm sphere on one end and a smaller 8mm sphere on the other. Choose yours in silver or two-tone. Need help finding your ring size? Check out the ring sizing guide. Dimensions Ring band: 4mm wide, 1.7mm thick Processing time Each Negative/Positive Duo ring is made to order. Please allow 3 to 10 working days (excluding shipping) for it to be created. © Fairina Cheng
    $265.00
    Rated 5.00 out of 5
  • 3D printed sterling silver stud earrings
    3D printed sterling silver stud earrings by Fairina Cheng

    Negative/Positive silver 3D print stud earrings

    These geometric sterling silver studs are a contemporary take on the traditional pearl earring. They feature frosty white inner surfaces offset by striking polished edges. Designed through a 3D printing process, their form makes them almost impossible to create by hand alone. Earrings are available in two sizes - Mini (8mm) and Midi (10mm). Each earring post is individually hardened for extra strength and durability. Processing time Each pair of Negative/Positive stud earrings is made to order. Please allow 3 to 5 working days (excluding shipping) for them to be created. © Fairina Cheng
    $180.00$195.00
    Rated 5.00 out of 5
  • Oxidized Negative/Positive silver stud earrings
    3D modelled black sterling silver studs

    Negative/Positive two-tone 3D print stud earrings

    These oxidized stud earrings were originally created on a 3D modelling program. Made in solid sterling silver, the inner surfaces are oxidized to a smoky black, with striking polished edges. Their form makes them almost impossible to create by hand alone. Studs are available in two sizes - Mini (8mm) and Midi (10mm). Earring posts are individually hardened for extra strength and durability. Processing time Each pair of Negative/Positive stud earrings is made to order. Please allow 3 to 5 working days (excluding shipping) for them to be created. © Fairina Cheng
    $180.00$195.00
    Rated 5.00 out of 5
  • 3D modelled oxidized earrings
    Black 3D printed silver stud earrings

    Negative/Positive oxidized 3D print stud earrings

    These 3D modelled solid sterling silver studs are distinct and infinitely fascinating. Created through a 3D printing process, they are oxidized, then polished and take on a beautiful glossy sheen. The colour ranges from a smoky black to a dark gunmetal grey. Earrings are available in two sizes - Mini (8mm) and Midi (10mm). Earring posts are individually hardened for extra strength and durability. Processing time Each pair of Negative/Positive stud earrings is made to order. Please allow 3 to 5 working days (excluding shipping) for them to be created. © Fairina Cheng
    $180.00$195.00
    Rated 5.00 out of 5
  • 3D printed rose gold earrings
    3D printed jewellery

    Negative/Positive rose gold 3D print stud earrings

    Created from the haphazard intersection of multiple planes, these solid 9ct gold studs are simple from afar and intriguing up close. The soft rosy blush provides a dash of femininity while the geometric high polish edges add a bit of attitude! Studs are available in two sizes – Mini (8mm) and Midi (10mm). Earring posts are individually hardened for extra strength and durability. Processing time Each pair of Negative/Positive stud earrings is made to order. Please allow 3 to 10 working days (excluding shipping) for them to be created. © Fairina Cheng
    $535.00$765.00
  • 3D printed yellow gold stud earrings
    Negative/Positive studs

    Negative/Positive gold 3D print stud earrings

    Matte inner surfaces and contrasting high polish edges give these gold 3D printed stud earrings a little bit of sass. Created from the haphazard intersection of multiple planes, these solid 9ct gold studs are simple from afar and intriguing up close. Studs are available in two sizes – Mini (8mm) and Midi (10mm). Earring posts are individually hardened for extra strength and durability. Processing time Each pair of Negative/Positive stud earrings is made to order. Please allow 3 to 10 working days (excluding shipping) for them to be created. © Fairina Cheng
    $535.00$765.00
    Rated 5.00 out of 5
  • Geometric sterling silver pendant
    Negative/Positive Mini necklace

    Negative/Positive mini silver 3D print pendant

    This sterling silver 3D modelled pendant is a little bit dainty with a whole lotta attitude! Hanging from a delicate cable chain, it was designed through a 3D printing process and features frosty white surfaces offset by striking polished edges. This pendant is available in two sizes - Mini (8mm) and Midi (10mm). Dimensions Pendant: Select your pendant size from the drop down menu below Chain: 45cm long measured unclasped from end to end Processing time Each Negative/Positive pendant is made to order. Please allow 3 to 5 working days (excluding shipping) for it to be created. © Fairina Cheng
    $159.00$169.00
    Rated 5.00 out of 5
  • Negative/Positive Mini necklave
    Negative/Positive Mini necklaces

    Negative/Positive mini two-tone 3D print pendant

    This two-tone sterling silver pendant is a little bit dainty with a whole lotta attitude! Hanging from a delicate cable chain, it was designed through a 3D printing process and features smoky black surfaces offset by striking polished edges. This pendant is available in two sizes - Mini (8mm) and Midi (10mm). Dimensions Pendant: Select your pendant size from the drop down menu below Chain: 45cm long measured unclasped from end to end Processing time Each Negative/Positive pendant is made to order. Please allow 3 to 5 working days (excluding shipping) for it to be created. © Fairina Cheng
    $159.00$169.00
    Rated 4.86 out of 5
  • Black 3D printed necklace
    Negative/Positive Mini stacking necklaces

    Negative/Positive mini oxidized 3D print pendant

    This oxidized sterling silver pendant is a little bit dainty with a whole lotta attitude! Hanging from a dainty silver chain, it is a smaller, more discreet version of the statement Negative/Positive necklace. Each pendant is oxidized, then polished and takes on a beautiful glossy sheen. The colour ranges from a smoky black to a dark gunmetal grey. This pendant is available in two sizes - Mini (8mm) and Midi (10mm). Dimensions Pendant: Select your pendant size from the drop down menu below Chain: 45cm long measured unclasped from end to end Processing time Each Negative/Positive pendant is made to order. Please allow 3 to 5 working days (excluding shipping) for it to be created. © Fairina Cheng
    $159.00$169.00
    Rated 5.00 out of 5
  • 3D printed gold necklace
    3D printed gold pendant

    Negative/Positive mini yellow gold 3D print pendant

    This necklace combines the best of both worlds with a solid 9ct gold pendant on a delicate sterling silver cable chain. The original 3D printed design was created on a computer and is almost impossible to make by hand alone. It features matte inner surfaces offset by striking polished edges. This pendant is available in two sizes - Mini (8mm) and Midi (10mm). Dimensions Pendant: Select your pendant size from the drop down menu below Chain: 45cm long measured unclasped from end to end Processing time Each Negative/Positive pendant is made to order. Please allow 3 to 10 working days (excluding shipping) for it to be created. © Fairina Cheng
    $295.00$395.00
    Rated 5.00 out of 5
  • Rose gold 3D printed necklace
    Negative/Positive Mini stacking necklaces

    Negative/Positive mini rose gold 3D print pendant

    This solid 9ct rose gold pendant was created on a computer and brought to life through a 3D printing process. Hanging on a fine sterling silver chain, it features matte inner surfaces offset by striking polished edges. A little necklace with a lot of attitude! This pendant is available in two sizes - Mini (8mm) and Midi (10mm). Dimensions Pendant: Select your pendant size from the drop down menu below Chain: 45cm long measured unclasped from end to end Processing time Each Negative/Positive pendant is made to order. Please allow 3 to 10 working days (excluding shipping) for it to be created. © Fairina Cheng
    $295.00$395.00
    Rated 5.00 out of 5
  • 3D printed sterling silver bracelet

    Negative/Positive silver 3D print bracelet

    This 3D modelled bracelet features a geometric sterling silver ball on a simple cable chain. The inside surfaces are finished to a frosty white, offset by striking polished edges. A little bracelet with a lot of attitude! Hint: Pair it with an engraved silver bracelet tag for an extra special touch. Dimensions Sphere: 8mm Chain: Select your bracelet length from the drop down menu below (if you’re unsure, 'Standard' fits most people and is usually the way to go!) Processing time Each Negative/Positive bracelet is made to order in your size. Please allow 3 to 5 working days (excluding shipping) for it to be created. © Fairina Cheng
    $159.00
    Rated 5.00 out of 5
  • 3D modelled oxidized sterling silver bracelet

    Negative/Positive two-tone 3D print bracelet

    This is one little bracelet with a lot of attitude. Designed through a 3D modelling process, it is cast in solid sterling silver and assembled on a simple cable chain. This is a design you can't stop looking at! Hint: Pair it with an engraved silver bracelet tag for an extra special touch. Dimensions Sphere: 8mm Chain: Select your bracelet length from the drop down menu below (if you’re unsure, 'Standard' fits most people and is usually the way to go!) Processing time Each Negative/Positive bracelet is made to order in your size. Please allow 3 to 5 working days (excluding shipping) for it to be created. © Fairina Cheng
    $159.00
  • Minimalist silver and gold jewellery

    Negative/Positive yellow gold and silver 3D print bracelet

    This unique bracelet is discreet from afar and intricate up close. Solid 9ct yellow gold and sterling silver combine to add a contemporary edge to an otherwise simple piece. Designed through a 3D printing process, its form makes it almost impossible to create by hand alone. Hint: Pair it with an engraved silver bracelet tag for an extra special touch. Dimensions Sphere: 8mm Chain: Select your bracelet length from the drop down menu below (if you’re unsure, 'Standard' fits most people and is usually the way to go!) Processing time Each Negative/Positive bracelet is made to order in your size. Please allow 3 to 10 working days (excluding shipping) for it to be created. © Fairina Cheng
    $295.00
    Rated 5.00 out of 5
  • 3D printed rose gold bracelet with a sterling silver chain

    Negative/Positive rose gold and silver 3D print bracelet

    Who says you can't wear gold and silver together? This unique bracelet combines solid 9ct rose gold and sterling silver, adding a contemporary edge to an otherwise simple piece. Designed through a 3D printing process, its form makes it almost impossible to create by hand alone. Hint: Pair it with an engraved silver bracelet tag for an extra special touch. Dimensions Sphere: 8mm Chain: Select your bracelet length from the drop down menu below (if you’re unsure, 'Standard' fits most people and is usually the way to go!) Processing time Each Negative/Positive bracelet is made to order in your size. Please allow 3 to 10 working days (excluding shipping) for it to be created. © Fairina Cheng
    $295.00
    Rated 5.00 out of 5

Get $10 off your order!